| HEALTH & SAFETY | TRADE PRACTICE | QUALITY | 1 | 2 | 3 | 4 | 5 | N/A |
| 11 points | Yes | 14 points | Yes | 70 points | Fail | Poor | Okay | Good | Great | Not Applicable |
| Safe tools |  | Arrive On Time | | Paper/Sheets Overall |  | | | | |  |
| Safe tool use | | Check materials | | Sheets at gutter | | | | | | |
| PPE usage | | Sheets straight at gutter | | Parallel to barge | | | | | | |
| Glasses | | Sheets parallel at flashings | | Valley straight | | | | | | |
| Hat | | No incorrect screws | | Parallel at junction | | | | | | |
| Gloves | | Turned up sheets | | Sheet turn up | | | | | | |
| Hi Viz | | Accurate measuring | | Flashings overall | | | | | | |
| Tidy site | | Correct marking pencils | | Accurate marking out | | | | | | |
| No cuts/abrasions | | Correct cutting tools | | Accurate cutting out | | | | | | |
| Good housekeeping | | Detailing correct | | Accurate folding | | | | | | |
| Muffs | | Correct screw tools | | Accurate matching planes | | | | | | |
| | Flashing planes correct | | Quality of cuts | | | | | | |
| | Completion of project | | Quality of folds | | | | | | |
| | as per RANZ guide | | Potential weather tightness | | | | | | |
| | | | | |
| TIME FACTOR | Module unknown | Time under allocation:
+1 point per minute
Max 27 points | |
| DEFECTS
IN QUALITY | Good quality Lose 1 point per defect for times under an hour | - points ( defects) |
| Okay quality Lose 2 points per defect for times under an hour | -0 points ( defects) |
| Poor quality Lose 3 points per defect for times under an hour | -0 points ( defects) |
| Fail quality Lose 4 points per defect for times under an hour | -0 points ( defects) |
| Judges Discretion | |
| FINAL SCORE | | |
